Mitel 6920 Quick Reference Manual page 11

Mitel 6920/6920w SIP Phone - Quick Reference Guide
changes.
6. After the phone reboots, it is successfully connected to the network. The connected
SSID (Hidden Network) is listed under Saved Network.
7. To disable Wi-Fi and use the LAN port again, navigate to Settings > Wi-Fi and press
the Disconnect softkey. The Save Settings dialog box appears.
8. Click Yes to reboot the phone and apply the changes.
Wi-Fi Network Connected/Wi-Fi Network Disconnected
If your phone successfully connects to the Wi-Fi network, name of connected network is
© Copyright 2023, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
listed under Saved Network.
If your phone is disconnected from the Wi-Fi network Wi-Fi disconnected symbol is
shown in the Status bar of the Home screen.