Mitel 6920 Quick Reference Manual page 10

Mitel 6920/6920w SIP Phone - Quick Reference Guide
QUICK REFERENCE GUIDE
a. WPA2-Personal- To connect to a WPA2-Personal network enter the Network Name
(SSID) and Password.
b. WPA2-Enterprise- To connect to a WPA2-Enterprise network enter the Network
Name (SSID), Username and Password.
c. Open- To connect to a Open network enter the Network Name (SSID).
Note: You can connect to only one SSID at a time. The SSID can be any alphanumeric, case-sensitive
entry from 2 to 32 characters. The characters allowed for the SSID depend on the router configuration.
Note: If you enter an incorrect Network Name or Username or password, Invalid Setting dialog box
appears. Ensure you enter the correct credentials.
© Copyright 2023, Mitel Networks Corporation. All Rights Reserved.
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel's Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel's website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
4. Press Save softkey.
5. The Save Settings dialog box appears. Click Yes to reboot the phone and apply the