Universal Remote Control R7 Owner's Manual page 21

IMPORTANT: If vou don't press a button within 20 seconds, the
LED light will turn off and exit the set-up mode and vou will need
to start over.
STEP 2: Press the VOLUME UP button and then press either the TV
or AUDIO button that vou want to use for volume. The Component
LED light will blink three times to confirm it is saved. This sets up a
group of three buttons (VOLUME UP, VOLUME DOWN and MUTE)
in one action!
VOLUME UP
Button
Repeat Steps 1-2 for all other Components.