C
HANGING THE
The Mouse Remote defaults to House Code A, and in most cases you
will not need to change this, unless you are experiencing interference
from a neighboring X-10 system.
1. Press and release the X-10 button.
2. Press and hold SETUP until the LED indicator lights steadily.
Release Setup button.
3. Use the number buttons to enter the number equivalent to the
chosen House Code (1=A, 2=B ..16=P).
4. Press the ENTER button to confirm the House Code. The LED
turns off.
Note: The House Code you choose must match the House Code on
the Transceiver and Modules you are using it with.
X-10 H
OUSE
61
C
:
ODE