Controlling; Remote - X10 Big Picture VK25A Owner's Manual

C
ONTROLLING
If you have already installed the Transceiver Module, you can control
it and other X-10 modules as follows:
1. Press and release the X-10 button.
2. Use the number buttons to enter the Unit Code number of
the chosen module. (You do not need to enter '0' first for a
single digit number.)
3. Press the appropriate button for the function you require
(see below).
X-10 FUNCTIONS:
On:
Off:
Bright:
Dim:
All Lamps On:
All Modules Off:
Note: You cannot dim or brighten an Appliance Module. If the
module was off and you press Bright or Dim (VOLUME+ or VOLUME-)
this will simply turn the module on.
Tip: After controlling X-10 Modules, press the TV button to return your
remote to TV mode. If you forget that the remote is in X-10 mode, next
time your press Mute, say when the phone rings, instead of muting
your TV, you will turn off all your lights instead!
X-10 M
ODULES WITH THE
CHANNEL +
CHANNEL –
VOLUME +
VOLUME –
POWER
MUTE
59
M R
OUSE EMOTE