Icture - X10 Big Picture VK25A Owner's Manual

R , R
ESOLUTION
Once you have the VA23A connected to your computer and to the
VT24A transmitter, and the VA20A connected to your TV you will be
able to see the picture from your PC on your TV screen. Note
however that the VA23A only works at 640 x 480 resolution, and a
refresh rate of 60 Hz. If you normally use your computer at a higher
resolution you will need to change this to use the VK25A system.
To do this (for Windows 95) right-click on our desktop and select
properties. Then select settings, choose 640 x 480 and click OK. If a
refresh rate setting is offered, make sure it is set for 60 Hz. (Note: an
updated driver might be available for your video card from the video
card manufacturer's WEB site). It might be necessary to reboot your
computer after changing this setting.
For Windows 3.x
1. Select the Windows Setup icon in the Program Manager.
2. Choose Change System Settings from the Options menu.
3. Select the 640 x 480 driver for the installed video card from the
Display pull-down box. Select 60 Hz if available (see above).
4. Select OK to confirm the setting change. At this point Windows
will locate the driver (either in the system or on a floppy disk
provided with the video card) and then re-start.
Note: if you can't find the driver for your video card, or the selected
driver doesn't display a picture on your TV, install the standard
Windows VGA driver which should be resident in the system. (Or
download the latest driver for your video card from its manufacturer's
WEB site).
After you see your PC's picture on your TV screen you can adjust its
position up and down, and left and right by pressing the arrow
buttons on the VA23A VGA-to-Video converter.
R ,
EFRESH ATE
20
P
AND

ICTURE

A
DJUSTMENT