X10 Big Picture VK25A Owner's Manual page 54

I C
DENTIFYING
( .)
CONT
3. Press and release SETUP. The LED blinks once.
4. To find the first digit, press each number button from 0 to 9
until the LED blinks. The number that caused the LED to blink
is the first digit of the code.
5. Press each number button from 0 to 9 again as above
to find the second digit.
6. Press each number button in turn to find the third digit. When
the third digit has been found, the LED will go out.
ODES FOUND USING THE
S
EARCH
54
P
ROCEDURE