Advertisement
Controls
Pushbutton
©
A
To enter and display the
cooking duration
©
B
To enter and display the
end of cooking time
f)
C
Manual (non-automatic)
operation
/2 D
To enter the temperature for
cooking with the probe
Knob
E
To enter the various cooking
times & temperatures (turn
either clockwise or counter
clockwise).
Cursor lights
The triangular cursor lights located on the
digital display, light up to indicate that the
selected function is being performed. The
oven is always set for manual operation
unless it is programmed in which case
cursor light 3 comes on to indicate that
the oven is functioning automatically.
Setting the clock
This 24 hour clock will need to be
set/re-set when the appliance is first
installed or after a power failure, the
digits and cursor lights (triangle 1 & 2) of
the display will flash to indicate this. To
set the correct time proceed as follows:
Depress simultaneously pushbuttons A
and B (00) and keeping them depressed,
turn knob E (—/+) clockwise (to go
forwards in time) or anticlockwise (to go
backwards in time) until the correct time
of day is displayed.
Release pushbuttons A and B to start the
clock running. Cursor lights 1 & 2 will go
out and cursor light 3 will start flashing.
To stop cursor 3 flashing, depress
pushbutton C (\!l!)). The oven is now set
for manual operation and reading the
correct time of day.
9
Advertisement
