Advertisement
Cooking timer
The cooking- timer can only be used when
the oven is set for manual operation.
Important
It is possible to set the cooking timer
when the oven is on BUT the oven will
then operate as if a semi automatic
cooking operation had been programmed
ie., the oven will automatically turn off
when the pre-set cooking time is over.
Therefore, if you are cooking in the oven
and then wish to use the timer to time
something else whilst the oven is still on,
you must remember to re-programme, or
turn back on, the oven.
The maximum programmable time which
can be set on the minute minder is 23
hours 59 minutes. To set the cooker timer
proceed as follows:
Depress button A (©) and keeping it
depressed, turn knob E (—/+) to the
required duration of time, release button
A Cursor lights 1 and 3 will now be on,
this is telling you that the programmer is
performing an automatic function (cursor
light 3) and that you have set a duration
of time (cursor light 1).
The programmer will count down from
the pre-set duration of cooking time, when
the time is up, cursor light 1 will go out
and the alarm will sound for two minutes
then stop automatically. At this point
cursor light 3 will be flashing, which tells
you that the oven needs to be re-set for
manual operation - to do this press button
C (\I!!|), cursor light 3 will go out.
Semi automatic operation of the oven
This enables you to manually turn on the
oven and programme the duration of
cooking time so that the oven switches off
automatically. The maximum duration of
cooking time is 23 hours 59 minutes.
To programme this function proceed as
follows:
Place the food to be cooked into the oven,
then turn the oven control and thermostat
control knobs to the required settings.
Depress button A (© ) and keeping it
depressed, turn knob E (—/+) to the
required duration of time, release button A
Pilot lights 1 and 3 will now be on, this is
telling you that the programmer is
performing an automatic function (cursor
light 3) and that you have set a duration
of cooking time (cursor light 1).
The programmer will count down from
the pre-set duration of cooking time, when
the time is up, cursor light 1 will go out,
the oven will automatically switch off,
and the alarm will sound. The alarm
sounds for two minutes, then stops
automatically.
At this point, cursor light 3 will be
flashing which tells you that the oven
needs to be re-set for manual operation.
To do this first turn the oven controls to
their off positions then press button C
( \1!!j ); cursor light 3 will go out which
means the oven has now been re-set for
manual operation.
NB: If you do not turn the oven controls to
their off positions first, when you press
button C ( ^ ), the oven will return to
manual operation and will remain on until
you turn the controls to their off positions.
10
Advertisement
