Advertisement
Thennostat control knob (Fig. 3)
By turning the thermostat control knob
clockwise you select the cooking
temperature. Temperature selection starts
at 50 °C and is marked in 25 °C increments
up to maximum, where the temperature
at the centre of the oven will reach
approximately 280 °C. The thermostat
controlling the temperature is totally
variable so it is possible to select
temperatures between those marked. The
MAX setting is particularly suitable for
grilling. Once the oven temperature has
been selected, the temperature light will
come on and remain on until the oven has
reached the correct setting; after that it
will come on and off with the thermostat
showing how the temperature is being
maintained.
During cooking the oven door should be
opened as little as possible to avoid heat
loss and so excessive electricity
consumption.
Fig. 3
8
Safety thermostat
Should the main oven thermostat fail, the
oven is protected by a safety thermostat
which will operate if the temperature
within the oven reaches too high a level.
Once the temperature has returned to a
safe level the main oven thennostat will
function.
In cases where there is a permanent
failure it is necessary to contact the
Zanussi Network Service Engineer.
Electronic programmer (Fig. 4)
This programmer allows you to pre-set the
cooking start time and determine the
duration of cooking required, as well as
acting as a cooking timer and clock. It also
shows the temperature measured by the
food probe when cooking automatically.
Most foods cook well automatically, but
preference should be given to those which
will not be affected by the waiting period
before the oven comes on.
Advertisement
