Advertisement
Removal/replacement of oven lamp
(Fig. 11)
Important
Remember to disconnect the electricity
supply before undertaking maintenance of
any kind.
Unscrew the ring nuts securing the right
side shelf supports and then remove the
supports. Slide the side panel towards you
and then pull away from the side of the
oven cavity wall.
Using a screwdriver carefully prise the
glass protection panel off as shown
(Fig. 11).
Replace the faulty bulb with one that
resists to high temperatures (300 °C).
Electric bulb: 3 x 15 W - 240 V (50 Hz)
300 °C E14. These are available from your
local service centre.
Important
When replacing the glass protection
ensure that the smooth surface is
on the outside ie., facing into the oven
cavity.
Fig. 11
18
Advertisement
