Advertisement
Totally automatic cooking
This function enables you to programme
the oven to turn itself on and off at pre-set
times without the need for you to be in
attendance. Most foods cook well
automatically but preference should be
given to those which will not be affected
by the waiting period before the oven
comes on. The maximum programmable
cooking duration is 23 hours 59 minutes.
When setting the programmer to carry
out totally automatic cooking, you first of
all set the duration of cooking, ie., how
long you want the oven to be oh for, then
you set the finished cooking time, ie., the
time by which you wish the contents of
the oven to be cooked. There is no facility
to set a cooking start time as the
programmer automatically works out
what time it needs to switch the oven on,
in order to cook for the pre-set length of
time and turn itself off at the programmed
finished cooking time.
To programme the oven for totally
automatic cooking proceed as follows:
Place the food to be cooked into the oven.
Depress button A (Q) and keeping it
depressed turn knob E (—/+) to the
required duration of cooking time. Release
button A, cursor lights 1 and 3 will come on.
Depress button B (B) and keeping it
depressed turn knob E (—/+) to display
the required finished cooking time.
Release button B, cursor lights 1, 2 and 3
will be on.
Wken the cooking programme starts,
cursor light 2 will go out.
At the end of the cooking programme the
oven switches off automatically, and the
alarm wilt sound for two minutes, then
that too will switch off automatically. At
this point cursor light 1 goes out and
cursor light 3 will start to flash. When you
return to the oven, return the oven control
and thermostat control knobs to their off
positions, and then depress knob C (\!!l)) to
re-set the oven to manual operation.
NB: If you do not turn the oven controls to
their off positions first, when you press
button C (\!!ll) the oven will return to
manual operation and will remain on until
you turn the controls to their off positions.
To cancel a programme, the displays
shown when either button A ((3) or
button B ( 0) are depressed, should be
returned to zero by means of knob E (—/+).
11
Advertisement
