Advertisement
Lay the door down on a flat horizontal
surface; press thoroughly down the
appropriate spring loaded catches (A -
Fig. 10), lift slightly up the glass (B -
Fig.
1
0) and remove it by pulling it forwards.
After having cleaned the door reassemble
the glass (C - Fig. 10) and replace the door
as follows:
1. Clasp the two hinges on either side of
the door together simultaneously.
2. Hook the top hinge into the top slot, so
that the hook is engaged with the roller,
3. Drop the lower hinge into the lower slot,
so that the notch is engaged. Drop the
door down so it is in the horizontal
position.
Note:
It is important when carrying out this
operation that both hinges be located
simultaneously.
4. Turn the retaining discs back a quarter
turn so that the two raised bars are
opposite the hinges.
The door can then be closed.
17
Advertisement
