To Control; A Second Tv, Vcr, Cable; Receiver; Searching For Codes - X10 SUPERREMOTE UR19A Owner's Manual

U AUX
SING TO CONTROL A
S TV, VCR, C
ECOND
S R
OR ATELLITE
The AUX button is normally used to
control an audio component, but it can
also be configured to control a second
TV, VCR, cable box or satellite receiver.
1. Turn on the
equipment you wish

to control.

2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
3. Press the AUX1 or
AUX2 button.
4. Press and release
the mode button
that matches the A/
V equipment you
want to control. The
LED blinks once.
5. Enter the 3 digit
Code from the
Library Code
Tables. The LED
turns off after the
last digit entered.
6. Point the remote at
your audio
component and
press the POWER
button. Your audio
component should
turn off.
7. Turn your audio
component on and
press CHANNEL +.
If it responds, setup
is complete.
B
ABLE OX
ECEIVER
22
Notes:
If your audio/video component does
not respond, try the other codes for your
brand. If it still doesn't respond, try the
Code Search method below.
If the LED blinked rapidly when you
entered the code, you may have entered
an invalid code. Recheck the code in the
code list and try again.
S F
EARCHING OR
1. Turn on the device
you want to control.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
Setup button.
3. Press the mode
button that matches
the equipment you
want to control. The
LED blinks once.
4. Press CHANNEL +
repeatedly* until
the device to be
controlled changes
channel.
If you go past the
code accidentally,
just press LAST
repeatedly until the
channel changes
again.
5. Press and release
the ENTER button to
complete the setup.
C
ODES
23