Using The Pc Button To Control; Box; Searching For Codes - X10 VK47A Owner's Manual

U PC
SING THE BUTTON TO
S TV,
CONTROL A ECOND
C B , S
ABLE OX ATELLITE
DVD P , L D
LAYER ASER
P , CD P
LAYER OR LAYER
The PC button is normally used to access
MP3, DVD, or CD players installed in a
PC. It can be reprogrammed to control
other items instead, but note that if you
do so you will no longer be able to
control PC functions. See Impor See Impor See Important note See Impor
See Impor
on page 25 before proceeding. on page 25 before proceeding. on page 25 before proceeding. on page 25 before proceeding. on page 25 before proceeding.
1. Turn on the
equipment you
want to control.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
3. Press the PC button.
4. Press and release
the mode button
that matches the
A/V equipment
you want to
control. The LED
blinks once.
5. Enter the 3 digit
Code from the
Library Code
Tables. The LED
turns off after the
last digit entered.
6. Point the remote at
your A/V
component and
press the POWER
button. Your A/V
component should
turn off.
12
7. Turn your A/V
component on and
VCR,
A
press CHANNEL +.
R ,
If it responds, setup
ECEIVER
is complete.
ISK
, .
ETC
S
EARCHING
tant note tant note tant note
tant note
1. Turn on the device
you want to control.
2. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
3. Press the mode
button* that
matches the
equipment you
want to control.
The LED blinks
once.
4. Press CHANNEL +
repeatedly** until
the device to be
controlled changes
channel.
If you go past the
code accidentally,
just press
CHANNEL -
repeatedly until the
channel changes
again.
5. Press and release
the ENTER button to
complete the setup.
F C
OR ODES
13