Skoda Citigo 2012 Workshop Manual page 31

Citigo 2012 ➤, Citigo-e iV 2020 ➤, Enyaq 2021 ➤, Enyaq Coupe 2021 ➤, Fabia 2000 ...
Note
If the damaged point is longer than 20 mm, insert new corru‐
♦
gated pipe and then perform the described work sequence
twice.
The repair point must not be exposed to tension or flexion.
♦
– Push tensioning rings -2- onto the ends of the pipes -1- in
such a way that two shafts of the pipe protrude.
– Then push O-rings -3- onto the ends of the pipe. One shaft
of the pipe protrudes.
– Fit pipes with tensioning rings onto the connecting pieces -4-
and -5- -arrows A-.
– Compress connecting pieces -4- and -5- -arrows B-.
– Perform a functional and tightness test.
Electrical System - general notes - Edition 12.2021
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.
1. Repairing washer fluid level pipes
27