■[F 1] Setting of OUT
Set the output mode of OUT.
●Switch output modes
Select the output mode required from the table below.
Hysteresis mode
Window
comparator
mode
Accumulated
output mode
(Increment)
Accumulated
output mode
(Decrement)
Accumulated
pulse output
mode
Output off mode
: The operation may become unstable if hysteresis mode or window comparator mode are used during fluctuating flow conditions. In
this case, maintain an interval between the set values and start using after confirming stable operation.
Normal output
-33-
Reversed output
No.PF※※-OMX0007-B