Default Setting - SMC Networks PF3A701H Operation Manual

■Default setting

(Main display)
[rEF ] Select display units
[F 0]
[Uni ] Units selection function
[oUt ] Select output mode
[ ot ] Select switch mode
[ P] Select input switch operation
[F 1]
[ H] Setting of Hysteresis
[CoL ] Select display colour
[F 3] [FiL ] Select digital filter
[FnC ] Select FUNC
[F 5]
[F10] [SUb ] Select sub display (Line name setting
[F13] [rEv ] Select Reverse display
[F14] [CUt ] Select Zero cut-off setting
[F30] [SAv ] Accumulated value hold
[F80] [dSP ] Display OFF mode
[F81] [Pin ]Security code
[F90] [ALL ] Setting of all functions
[F96] [Sin ] Check of input signal
[F98] [tES ] Setting of output check
[F99] [ini ] Reset to the default settings
1: Setting is only possible for models with the units selection function.
2: 1 to 5 V or 0 to 10 V can be selected when the analogue voltage output type is used.
Analogue output free range function can be selected.
3: When Line name is selected, a suitable line name can be input.
Function (Main display)
(Left sub display)
1
(switching analogue output/external input)
[ Std] Standard condition
[
[ HYS] Hysteresis mode
[
[ 500] 500 L/min (PF3A701H)
[1000] 1000 L/min (PF3A702H)
[ 50] 50 L/min (PF3A701H)
[ 100] 100 L/min (PF3A702H)
[ SoG] Green when ON
[ 1.0] 1 second
[ oUt] Analogue output
3
4
) [ dEF] Default setting
[ oFF] Reverse display OFF
[ 1.0] 1%F.S. cut
[ oFF] Not stored
[ on] Display ON
[ oFF] Not used
[ oFF] Not used
[ - - - ] No input signal
[
[ oFF] Not used
-30-
Default Settings
(Right sub display)
L] L/min
P] Normal output
Red when OFF (OUT1)
n] Normal output
No.PF※※-OMX0007-B