Table of Contents
Advertisement
5 Troubleshooting
5.1 No Picture
Power switch indicator does not light up
• Check whether the power cord is connected properly.
• Turn the main power switch on.
• Touch
.
• Turn off the main power, and then turn it on again.
Power switch indicator lights up: Green
• Increase "Brightness", "Contrast", or "Gain" in the Setting menu. (See
Brightness / Colors
• Turn off the main power, and then turn it on again.
Power switch indicator lights up: Orange
• Try switching the input signal (see
• Move the mouse or press any key on the keyboard.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly. Connect the signal cables to the
connectors of the corresponding input signal. Connect the signal cable to
inputting a DisplayPort signal.
up.
• Turn off the main power, and then turn it on again.
Power switch indicator blinks: Orange, Green
• Connect via the signal cable specified by EIZO. Turn off the main power, and then turn it
on again.
• If the signal cable is connected to DisplayPort ( ), try switching the DisplayPort version
(see
Setting the Version for DisplayPort Input
The message "No Signal" appears on the screen
Example:
• The message shown above may appear as some PCs do not output a signal
immediately after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly. Connect the signal cables to the
connectors of the corresponding input signal. Connect the signal cable to
inputting a DisplayPort signal.
up.
• Try switching the input signal (see
• If the signal cable is connected to DisplayPort ( ), try switching the DisplayPort version
(see
Setting the Version for DisplayPort Input
[} 9].)
Setting the Input Signal
is used for output when a daisy-chain connection is set
is used for output when a daisy-chain connection is set
Setting the Input Signal
[} 8]).
[} 14]).
[} 8]).
[} 14]).
Troubleshooting | 5
Adjusting
when
when
19
Advertisement
Table of Contents
