Samsung Xpress SL-M2835DW/XAA User Manual page 112

Installing driver over the network
Command- line Definition
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name, IEEE1284 port name or
network path.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
• /
p"\\computer_name\shar
ed_printer" or
"\\xxx.xxx.xxx.xxx\shared_
printer" in where,
"\\computer_name\share
d_printer" or
"\\xxx.xxx.xxx.xxx\shared_
printer" means the
network path to the
printer by entering two
slashes, the computer
name or local IP address of
the PC sharing the printer,
and then the share name
of the printer.
Command- line Definition
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified printer
/N"<Printer name>"
name.
/nd or Commands not to set the
installed driver as a default
/ND
machine driver.
Description
Since machine drivers should
be installed on the OS specific
location, this command
applies to only application
software.
With this parameter, you can
add printer instances as your
wishes.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers installed.
If there is no installed
machine driver on your
system, then this option
won't be applied because
Windows OS will set installed
printer driver as a default
machine driver.
2. Using a Network-Connected Machine
112