Table of Contents
Advertisement
Wyse Customer Support
4.
Verify DHCP. Before installing WSI, make sure that DHCP is running. You can do
this by connecting a device to the server's hub, unmanaged switch or crossover
cable and verify that you get an IP address. If this is not the case, correct the
problem first. IF DHCP IS NOT RUNNING, DO NOT INSTALL WSI.
5.
Install Wyse Simple Imager.
Double-click on the WSISetup.exe file and follow the installation prompts. Use the
"default" installation parameters. Verify that the installation path is the same as
the Default path of the IIS FTP root path (see Figure 2).
6.
After WSI Setup is complete, a Wyse Simple Imager shortcut will be created on the
desktop from which the application can be run.
7.
Setup TFTPD. From "Start", go to "Run" and browse
C:\inetpub\ftproot\rapport\tools\sa\util and run the file TFTPD32.exe.
QSG - WSI 1.3.6 v3.doc
Figure 3 - FTPRoot Install Path
Figure 4 - WSI Icon
Pager 5 of 15
- Quick Links:
- Wyse Simple Imager Usage
Hide quick links:
Advertisement
Table of Contents
