Table of Contents
Advertisement
Disc
Problem
Playback does not start after a disc is inserted.
Some functions are not available.
Playback does not start (or stops immediately)
when a/d is pressed.
The CD is not ejected when = is pressed.
Alarm
Problem
The music assigned to the alarm does not play
when the alarm sounds.
Cause
The unit does not support the disc inserted.
The disc may be dirty.
The unit does not support the disc inserted.
If the unit was moved from a cold to warm place, condensation
may have formed on the disc reading lens.
Cause
"BEEP" is selected for the alarm type.
The selected content is not currently available.
The selected service is broadcasting silence.
A CD or USB flash drive selected as the source of music is not
inserted in or connected to the unit.
51
Solution
Use a disc that is supported by the unit ( p. 55).
Wipe the disc clean ( p. 55).
Use a disc that is supported by the unit ( p. 55).
Wait for an hour or two until the unit adjusts to the room
temperature, and try again.
Use Manual disc eject in the option settings to eject the disc
( p. 39).
Solution
Follow on-screen MusicCast Controller instructions to select
"Source" or "Source + BEEP" for the alarm type.
Content reception may fail due to a network error, or the service
may have been terminated. Try selecting other content.
Some services broadcast silence at certain times of the day. When
this occurs, there are no problems with reception, but no sound
plays. Try selecting another service.
Insert the CD in the unit or connect the USB flash drive to the unit.
Troubleshooting
Advertisement
Table of Contents
