Table of Contents
Advertisement
Using Bluetooth speakers/headphones to listen
to audio (transmitting function)
Bluetooth speakers or headphones can be used to listen to audio played via the unit.
This function can only be controlled using the MusicCast Controller app.
This function cannot be used when Bluetooth is selected as the input source. Select an input
source other than Bluetooth.
Be sure to use Bluetooth speakers or headphone that are equipped with a volume control.
Volume must be adjusted using the Bluetooth speakers or headphones. Volume cannot be
adjusted from this unit.
Use the volume control on the Bluetooth speakers or headphones to turn down the volume,
and then connect the speakers or headphones to the unit. Failure to turn down the volume
before connecting may result in extremely loud playback to begin when the Bluetooth
connection is established.
Equalizer and sound mode settings ( p. 30) are not reflected when listening to audio through
Bluetooth speakers or headphones.
1
Set Bluetooth speakers or headphones to pairing mode.
2
Use the MusicCast Controller app to select an input source.
Bluetooth speakers or headphones
3
Tap
in the playback screen.
4
Tap Bluetooth Transmission in the Sound
Settings screen.
5
Enable the Bluetooth transmission function in the Bluetooth
Transmission screen.
6
Select the Bluetooth speakers or headphones to be connected.
If a Bluetooth connection is not established, repeat the connection procedure from step
15
Play from an input source
1
.
Advertisement
Table of Contents
