Table of Contents
Advertisement
70
Seats
and s torage
.::>
page 34 © .::> f ig. 76 . This prevents any ac-
cess to the luggage compartment from the
vehicle inte rior.
You can on ly enlarge t he luggage compar t-
ment if the backrest is not locked .
~
WARNING
-
- The backrest must a lways be securely
latched so that the safety belt of the cen-
ter seating pos ition can work properly to
help protect the occupant .
- The backrest must be secure ly latched in
posit ion so that no items contained in
the luggage compartment
can slide for-
ward upon sudden braking .
- Always check whether the latch is fully
engaged by pu lling the seatback for-
wa rd.
- Never allow safety belts to become dam-
aged by being caught in doo r o r seat
hardware .
- Torn or frayed safety belts can tear and
damaged belt ha rdware can break in a
crash . Inspect the be lts periodica lly.
Belt s s howing damage to we bbing, bind-
ings , buckles , or retractors must be re-
placed .
(D
Note
- If
you move the front seat back when the
rear seat ba ckrest is fo lded fo rward, you
could damage t he head rest raints on the
rear sea t .
- Slide the belt guide on t he outside safety
belt all the way up before folding t he
backrest back forward. Make su re the
seat belt is not pinched o r damaged
when the rear seat backrest if folded
back. Other objects shou ld be removed
from the rear seat bench to protect the
seatback from damage.
Partition net (seatback in upright
position)
Applies to vehicles: with partition net
The partition net is designed to prevent loose
objects from flying forward into the passen-
ger compartment (e.g. under sudden brak-
ing).
Fig. 77
Behind the backrest : hanging the part itio n net
Fig. 78
Behind the backre st: removing t he parti tion
net
Hanging
.,. Pull the net upward . Hang the crossbar in
the rear eye lets
over th e rear bench seat
¢
fig. 77 -arrow-.
Removing
.,. Tilt the seatback forwa rd.
.,. Press the left and right release knobs
¢
fig . 78 -arrow- and pull the net upward
and out.
Installing
• Ti L t the seatback forward
¢
page 69 .
.,. Move the partition net left and righ t in the
retain ing clamp .
.,. Press the partition net down diagonally at
t he left and right until it locks into place and
t he red ma rkings on the butt ons are no lon-
ger vis ible.
..,.
Advertisement
Table of Contents
