Table of Contents
Advertisement
@
Tips
- Programming using the Homelink but-
tons is not possible with all infotainment
systems. If this is the case, program
Homelink as described in version A
<=> page 125.
- The required distance between the hand
transmitter and the Homelink module in
the radiator grille <=>
fig. 138
depends on
the system that you are programming.
- Depending on the model of the garage
door opener, you may need to release the
button on the remote and press it again
when programming. When program-
ming a new device, keep the button
pressed for at least 15 seconds before
trying again with the transmitter in a dif-
ferent position. Watch out for the emer-
gency flasher during that time.
Programming the rolling code
App lies to vehicles: with Home link
Additionally, a rolling code programming for
the Homelink universal remote control is re-
quired for some systems.
Identifying the rolling code
"'Press the previously programmed Homelink
button again and hold it down.
"'Look at the
LED@ r=) p age 124, fig. 136.
If
the LED blinks quickly, the features, such as
the garage door opener, are equipped with
the rolling code.
"'Program the rolling code as follows:
Activating the garage door opener motor
unit
"'Locate the setting button on the garage
door opener motor unit. The exact location
and color of the button may vary depending
on the garage door opener manufacturer .
"'Press the setting button on the garage door
opener motor unit (usually this will activate
a "setting light display" on the motor unit).
Now you will have about
30 seconds
time to
perform the HomeLink button programming
on the controls.
Homelink
127
Programming on the controls
"'Press the Home Link button that was already
programmed and hold for two seconds.
"'To end rolling code programming , press and
hold the Home link button for two seconds
again.
"'The Homelink button may need to be press-
ed a third time to end the adjustment proce-
dure for some garage door openers .
After the controls have been programmed, the
garage door opener should recognize the
Homelink signal and operate when the Home-
Link button is pressed . Now you may program
the other buttons as needed .
(D
Tips
- Programming the rolling code can be
performed quicker and more easily with
the help of a second person.
- If difficulties should arise when pro-
gramming the rolling code, consult the
operating instructions for the garage
door opener or other devices for possible
solutions.
Advertisement
Table of Contents
