Advertisement
E] Power input terminal (12V== /24 V~)
Connect to a DC 12 V or AC 24 V power source. When DC
Caution:
equipment on until connections are completed.
The power voltage is specified as DC 12 V or AC 24 V.
Be careful to connect the DC 12 V power supply, with
power source, use the optional AC adapter AC-C624
(for
the U.K.) or AC-C622 (for countries other than the U.K.).
When operating with an AC 24 V power supply, use only an
isolated power source.
:
the correct +/— polarity.
Use a DC 12V power source with ripple voltage of less
than 50 mV.
Do not power the unit with both AC 24 V and DC 12 V
at the same time. Be sure to connect only one power
source.
OC 12v
-
Power
source
POWER
indicator
Lights when the camera is powered.
Saee
Picture adjustment section
AGC, BLC, Shutter mode, IRIS LEVEL, Sync mode, H/V
phase, SC phase and White balance controls are provided.
Perform the following adjustments and settings according
to the shooting (or lighting) conditions.
|
Advertisement
