Informa琀椀 On Screen - Janome Quilt Maker Pro 16 User Manual

User Manual
To update the op琀椀 onal rear display's so昀琀 ware
If you have the op琀椀 onal rear handlebars and display, you will need to update the rear display as well.
• To update the rear display, insert the USB into the port on the right side of the rear display and run the
display update feature from the rear display.
 IMPORTANT: Do not remove the USB drive from the port un琀椀 l the machine display screen is once
again ac琀椀 vely displayed. This may take 1.5 to 2.5 minutes. If the USB drive is removed prematurely
the program will not fully update. This will corrupt the display so昀琀 ware.
Information Screen
To monitor system informa琀椀 on about your machine
You may need to provide system informa琀椀 on to Janome or an authorized Janome representa琀椀 ve when
purchasing machine accessories or receiving technical assistance.
• Touch the Informa琀椀 on icon in the toolbar.
Shows the machine's electronics
version number.
Shows the screen's version
50
QUILT MAKER PRO 16
To open the informa琀椀 on screen, touch the Informa琀椀 on icon in the toolbar. A昀琀 er
selec琀椀 ng it, the icon turns blue. Choose from the informa琀椀 on op琀椀 ons on the
screen.
number.
Shows the life琀椀 me s琀椀 tch
count for the machine.
Shows the machine's
so昀琀 ware version number.
Shows the screen's
so昀琀 ware version number.
www.janome.com