Table of Contents
Advertisement
5 8
Clear v ision
SE
(Southeast),
S
(South),
SW
(Southwest),
W (West), NW (Northwest).
(D
Tips
To avoid inaccurate directions, do not a l-
low any remote controls, electrical sys-
tems, or metal parts close to t he mirror .
Setting the magnetic deflection zone
The correct magnetic deflection zone must be
set in order to display the directions correctly.
Fig. 72 Magnet ic deflection zone boundaries
.. Hold the @ button
~
page 57, fig. 71 down
until the number of the set magnetic deflec-
tion zone appears on the interior rear view
mirror .
.. Adjust the magnetic deflection zone by re-
peatedly pressing on the @ button . The set
mode automatically deactivates after a few
seconds.
Calibrating the compass
The compass has to be recalibrated if the dis-
play is wrong or inaccurate .
.. Hold the @ button down until the letter C
is displayed on the inte rior rearv iew mirro r.
.. Drive in a circle at a speed of abo ut 5 mph
(10 km/h) until a direction is shown on the
interior rearview mirror .
_&
WARNING
-
-
The digital compass is to be used as a di-
rectional aid only. Even though you may
want to look at it while you are driving, you
must st ill pay atte ntion to traffic, road a nd
weather conditions as well as othe r possi-
ble hazards.
Advertisement
Table of Contents
