Sun Visors; Wiper And Washer System - Audi R8 Spyder 2012 Owner's Manual

lever is controlled by a light sensor locat-
ed in the instrument panel. The instru-
ment panel illumination will automat i-
cally become dimmer as the daylight
fades away and eventually will go out
completely when outside light is very
low. This is to rem ind you, t he drive r, to
switch on the headlights before it gets
too dark.
- Canada models: instrument panel illum i-
nat ion will stay bright regard less of the
int ensity of amb ient lig ht. Always be
aware of changes in outside light condi-
tions wh ile you are driving. Respond in
time to fading daylight by t urning the
light switch to position
io
(or "AUTO" if
your car is equipped with this feature) to
turn on your headlights.
Luggage compartment light
The light is located on the right side of the
luggage compartment .
These lights come on automatica lly when the
front lid is opened. The lig hts turn off auto-
mat ically if the lid is left open for more then
10 minutes.
Sun visors
CJ
C •-·-·--·,
~
-----
____
,,_
~
--·----"-
-----
--
..
----
~ ---- s;i~~~j
.---~~·-·oiiiiiii------------1
Fig. 65 Sun visor
The vanity mir rors in the sun visors are equip-
ped with covers.
Clear
vi sion
5 3
Wiper and washer
system
Windshield wiper
The windshield wiper lever controls both the
windshield wipers and the washer system.
Fig. 6 6 W ip er lever
The w indshield wiper lever¢ fig. 66 has the
follow ing positions:
Intermittent wiping 'Pl (activating rain
sensor)
.,. Move the lever up to position
(D .
.,. Move the switch
@
to set the duration of
the wipe intervals or to adjust the sensitivity
of the light/rain sensor.
Low wiper speed
.,. Move the lever up to position @ .
High wiper speed
.,. Move the lever up to position @ .
One-touch wiping
.,. Move the lever to positio n
@,
when you
want to wipe the windsh ield briefly .
Automatic wip er/ washer
.,. Pull the lever to position
®
(toward the
steering whee l) and hold .
.,. Release the lever. The washer system stops
and the wipers continue to operate for
about 4 seconds. Different numbers of wipe
cycles are performed depending on how
long t he lever is held.
Turning off the w ipers
.,. Move the lever back to position
@.