Table of Contents
Advertisement
28
Dr ive r information
system
The top row shows the current lap number: e .
g. LAP 2
(=
second lap).
Starting lap time
.. Press the upper section of the rocker
switch. Row @ ¢ fig. 19 disp lays the current
lap time.
Saving lap time
.. Press the upper section of the rocker switch
again. This simultaneously starts the meas-
urement for the next lap.
After being saved, the first recorded lap time
moves from the lowest to the next highest
line in the display @ ~ fig. 20 . The lower line
@ identifies the newly started lap time .
Recording additional lap times
Fig. 21 Display: Lap 2 is saved
After starting the lap timer, a timed lap is
comp leted and stored and t iming beg ins for
the next lap every time the upper section of
the rocker switch is pressed. Cont inue as de-
scr ibed above to measure additional lap
times.
The current lap time is disp layed in the bot-
tom line of the display @ ¢ fig. 21.
After being saved, the last recorded lap time
moves from the lower to the next higher line
on the display @ ~ fig. 21. The lap tim e be-
fore the last one also
moves
up one line @ .
The lowest line © identifies the newly started
lap time.
Displaying split time or inserting a
pause
Split time is indicated by a star.
Fig. 22 Display: Showing a split t ime
It is possible to recall split times for spec ific
stretches. If you would like to insert a pause
during a lap, you can stop the time recording.
Displaying split time or inserting a pause
.. Press on the lower section of the rocker
switch to display the split time @ . While
the split time marked with a star is being
disp layed, the time recording continues to
run in the background .
.. Press the lower section of the rocker switch
again to insert a pause. Timing is interrupt·
ed, the star in the last row disappears .
Resuming timing
.. Press the upper section of the rocker switch
to resume timing from the split time or
pause display.
Switching the display between the lap
timer and trip computer
You can retrieve info rmation from the t rip
computer wh ile the lap timer stopwatch is
runn ing.
Selecting the trip computer
.. Press the
I RESET I
button br iefly to display
the trip computer . You can now operate the
trip computer as usual.
Selecting the lap timer
.. Press the
I RESET I
button until the lap timer
¢page 27, fig . 18 appears .
Advertisement
Table of Contents
