Panasonic Digital Palmcorder PalmSight PV-DV600 Operating Instructions Manual page 80

Before Requesting Service
If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
No picture in the EVF or LCD Monitor ... * Make sure the Power Source ís connected.
(pp. 12, 13)
* Make sure the POWER switch is set to ON.
(pp. 30, 35)
* Check the Dew Indicator. (p. 29)
* Make sure the battery is fully charged. (p. 11)
* Make sure all necessary cables are connected
correctly and firmly. (p. 13)
Video cassette can't be inserted ... * Make sure the Lens Cap is removed. (p. 30)
* Make sure the Power Source is connected.
(pp. 12, 13)
Video cassette can't be removed ... * Insert the cassette with the window side facing up.
(p. 8
No operation starts when operation buttons | * Make sure the Power Source is connected.
are pressed ... (pp. 12, 13)
Recording cannot be done ... * Check the Dew Indicator. (p. 29)
* Make sure the record tab is closed. (p. 15)
» Check the Battery Indicator. (p. 26)
Auto Focus does not operate ... * Make sure the FOCUS is set to AUTO. (p. 56)
* Make sure the unit is ON with CAMERA mode.
(p. 30)
Sound from microphone cant be monitored . bar sure the unit is set to REC or Record/Pause
mode.
Sound can't be heard ... * Make sure the Audio on the VCR MENU is set to
ST1. (pp. 25, 60)
Request for Service Notice
Please photocopy this form when making a request for service notice.
In the unlikely event this product needs
Request for Service Notice: : Please include your proof of purchase.
(Failure to due so will delay your repair.)
* To further speed your repair please provide
an explanation of what is wrong with the unit
and any symptom it is exhibiting.
Mail this completed form and your Proof of Purchase along with your unit to:
Panasonic Services Company
1705 N. Randall Road
Elgin, IL. 60123-7847
Attn: Camcorder Repair
Please write the displayed Self Diagnostic number here.
(page 79)
80 For assistance, call 1-800-211-PANA(7262)