Panasonic Digital Palmcorder PalmSight PV-DV600 Operating Instructions Manual page 23

G)
s SHUTTER (page 52) DISPLAY SETTING 2
When set to ON, still pictures taken in e DISPLAY (page 26) =}
the PhotoShot mode are recorded with To select the desired type of display (©
a visual shutter effect and click sound. and counter indication displayed on the T,
+
SELF-REC (page 31)
LCD Monitor or in the viewfinder.
S
NORMAL: During self-recording, the * C.RESET (page 26) m
picture on the LCD Monitor Setting to ON, resets the counter to D
is the same as it will be zero.
recorded. * DATE/TIME (page 27)
MIRROR: During self-recording, the To display the date and time on the
picture on the LCD Monitor screen.
is horizontally reversed. « CLOCK-SET (page 19)
+ WIND-CUT (page 30) When set to ON, the date and time can
To reduce sound distortion caused by be set on the screen.
wind hitting the microphone. However, LCD/EVF SETTING
this slightly deteriorates the sound
reproduction in the bass range.
+
LCD/EVF SETTING (page 31)
Setting to ON displays the menu for
CAMERA SET-UP
adjusting the LCD brightness and color
* REMOTE (page 34) level and the viewfinder brightness.
VCR1:To receive signals from the
Remote Control set to VCR1.
VCR2:To receive signals from the
Remote Control set to VCR2.
Photo Rec Mode Menu
OFF: To prevent reception of signals Screen
from the Remote Control. CARD SETTING
* TALLY-LED (page 30)
REC MODE
NORMAL@FINE
Tally LED lights during recording when
set to ON.
s BEEP
Set to ON to beep when starting and
stopping camera recording or when
unusual conditions occur. To cancel
the beep, set to OFF.
Palmcorder will beep:
* Once when you start recording
* Twice when you stop recording
* Repeatedly when warning of
unusual conditions (pages 28, 29).
+ ¡R-COLOR (page 53)
To select one of the 3 IR-COLOR
modes after slide IR FILTER Switch to
ON.
CARD SETTING
+ REC MODE (page 41)
To select Photo Rec Mode.
23