Panasonic Digital Palmcorder PalmSight PV-DV600 Operating Instructions Manual page 26

Electronic Viewfinder/LCD Monitor Indications
Here are some of the basic indications which will appear on the Palmcorder EVF and
LCD Monitor. All indications, except the Date and Time, will NOT be recorded onto the
tape.
e f
0 TT ®
JAN
a. Battery Remaining
b. Tape Remaining
(AY-DVM3DEA) — (AY-DVMGOEA)
R0:30 R1:00
- R0:00- - R0:00-
* |t will take severa! seconds for the tape
remaining indicator to operate after the
tape starts moving.
c. Digital Zoom and other Digital
Function (page 51)
This display appears when the digital
zoom function has been activated.
d. Playback Effect (page 55)
This display appears when SEPIA or
MONO is selected in VCR menu.
e. Tape Speed Indication (page 22)
Indicates the tape speed (SP or LP).
VOLUME llill
12:34:56AM
2 2000 LINE-IN
f. Display On/Off and Counter/Time Code
The indication switches as shown below
when the desired "DISPLAY" mode is
selected from the menu (pages 23, 25).
* When selecting OFF, ail displays turn
off.
Linear Time Counter Memory Counter
= 0:00:00 PAUSE
R9:12 EiS300x
D.Z00M2 O'AXMF
mwn 00 m 006001 PAUSE
RO:12 EIS300x
D.200M2 QO'AXMF
Time Code
Memory Counter M 0:00:00
The Palmcorder will stop whenever it
reaches the point where the counter was
previously set to M 0:00:00 during audio
dub, fast forward or rewind.
Time Code 0h00m00s00t
The Palmcorder calculates and displays
exactly where you are on any tape in terms
of hours, minutes, seconds, and frames
(30 frames = 1 second).
e This display can not be reset.
IMPORTANT NOTE:
Display must be set to ON for MF, AE,
W.BALANCE or BACK LIGHT indications to
be displayed on the EVF or LCD Panel
when selected.