Sony DTC-87ES Operating Instructions Manual page 8

| Mofer-htfolam- lire allareti(elame) mOxe)il (ae) [-}
Front Panel/Remote Commander
Tape operating buttons
m(stop): Press to stop recording or playback.
(play): Press to play back the tape.
@ (recording): Press to start recording. After pressing
this button, press Hf or >.
Ht (pause): Press to stop for a moment during recording
or playback. To restart recording or playback, press
this button again or press >.
If the unit is left in the pause mode for about 10
minutes, it will automatically be released and the
deck will enter the stop mode. To restart recording
or playback from the stop mode, press REC or >
respectively.
O (record muting): Inserts a sound-muted portion
(space).
M¢<¢/m1 (AMS): Press to locate the beginning of the
selection during the playback.
</> (rewind/review, fast-forward/cue): In the stop
mode, press to rewind/fast-forward the tape. During
playback, press to rewind or fast-forward the tape while
listening to the sound.
IND
24] DATE button
RECORDED: Press to display the recording day of the
tape being played.
PRESENT: Press to display the current time.
Each time the RECORDED or PRESENT buttons are
pressed, year, month, and day display or hour, minute
and second display is switched respectively.
MARGIN RESET button
Press to reset the margin of peak level.
PHONE LEVEL control
The PHONE LEVEL control adjusts the headphones volume
level.
8
TIME SEARCH button
Press to search the position of the tape you want to listen
to by giving the time elapsed from the beginning of the
tape.
RMS play buttons
ENTER: To program the selections in a desired order,
press this button after pressing the numeric buttons.
CHECK: Press to check the programmed contents.
REPEAT A+B button
Press to play back a desired portion repeatedly.
CD operation buttons
Operative only for the Sony CD player equipped with a
Remote Commander.
tt (pause): Sets the CD player in the pause mode during
playback. Press again to release pause. !f pressed
twice when the player is in the stop mode, playback
starts.
<4/mP (AMS): Press to locate the desired selection on
the Compact Disc during playback or in the stop mode.
CD SYNCHRO (CD synchronized recording) buttons
(The playback of the CD player equipped with a Remote
Commander and the recording of the DAT deck can be
performed simultaneously.)
STANDBY: Press to set the unit in the record-standby
mode.
START: Press to start recording of the DAT deck and
then playback of the CD player.
STOP: Press to stop the DAT deck recording and the CD
player playback.