Sony DTC-87ES Operating Instructions Manual page 10

[Moler-hitelem-varem me lated t(elameymerelai ine) i)
Display Window
To turn off the display window
When the power is turned on, the display window also is
turned on. During recording or playback, all display or
some parts of the display can be turned off.
Each time the DISPLAY MODE button is pressed, the
indicators changes as follows:
Normal indicators
Peak level meters and margin indicators go off.
| (DISPLAY OFF indicator lights.)
All the indicators go off.
To change the brightness of the display window
While pressing COUNTER MODE, press one of the numeric
buttons 1, 2 and 3. The greater number pressed, the darker
the display window becomes.
(When operating with the Remote Commander, also press
COUNTER MODE.)
LONG PLAY mode indicator
Lights when recording or playback is being performed in
the long play mode.
[2] DATE indicator
Lights when pressing the RECORDED to display the
recording day of the tape being played. Lights off when
pressing PRESENT button to display the current time.
pate 19°
Gi. fo tw to
[Is
20 50 40 30
10
SAMPLING FREQ
4 A. ! kHz
14
L pcs aset ee rc ha a es Ie
Qe ae a A A A I AE NT EN A A EOS
EMPHASIS indicator
Lights when a tape recorded with emphasis is played
back, or when recording from a digital signal on which
emphasis is applied. The emphasis function reduces the
noise of the high frequency level by boosting the high
frequency level during recording (Pre-emphasis function)
and by lowering it during playback (De-emphasis function).
This unit incorporates only the de-emphasis circuit, You
can play or record the emphasized signal but newly
applying emphasis cannot be performed.
COPY PROHIBIT indicator
Lights when recording the digital signal with the copy
prohibit code. In this case, record with the LINE IN jack.
TOC (Table of contents) indicator
When a pre-recorded DAT cassette is played back, this
indicator will light.
[6] SKIP PLAY indicator
When this indicator is lit during playback, the portion
marked by the skip ID is skipped and playback continues
from the next start ID.
SAMPLING FREQ. (Sampling frequency) indicator
48 kHz: For recording/playback of analog input signals
(standard mode)
44.1 kHz: For recording/playback of CD and aprerecorded
DAT cassette
32 kHz: For recording/playback of analog input signals
(long-play mode)
DIGITAL IN
OPTICAL
2 0 OVER