Optical In/Out - Sony DTC-87ES Operating Instructions Manual

OTe) alal=xeutle)ars
LINE IN (line input) jacks (phone jack)
Connect to the recording outputs of an amplifier. Signals
supplied by the amplifier can be recorded using the
sampling frequency of 48 kHz in the normal play mode or
32 kHz in the long play mode.
[2] LINE OUT (line output) jacks (phono jack)
Connect to the DAT or tape inputs of an amplifier. The
playback signal of this deck will be output.
COAXIAL/OPTICAL DIGITAL IN (digital input) jacks
(coaxial phono jack/optical jack)
Connectto the digital outputs of an amplifier having a built-
in D/A converter or other digital source, such as a CD
player for digital-to-digital recording.
Connecting Cord
COAXIAL/OPTICAL DIGITAL OUT (digital output) jack
(coaxial phono jack/optical jack)
Connect to the digital inputs of an amplifier having a built-
in D/A converter or another DAT deck, for playback of a
DAT cassette or digital-to-digital recording.
Notes on connection
e Use the connecting cords specified in the illustrations.
e@ Turn off the power for all equipments before making
connections.
e Be sure to insert the plugs firmly into the jacks. Loose
connections may cause hum and noise. When unplugging,
grasp the plug and not the cord.
Notes on the optical cable
@ Donot bend the cord. When the cord is not used, curl it
with a diameter of more than 15 cm (5 7/, inches).
e Donot use it under high temperatures,
e When the optical cable is not connected, cover the
OPTICAL IN/OUT jacks with the supplied caps.
Note on sound signals
When connecting an optical cable to the DIGITAL IN/
DIGITAL OUT jacks, sound signals (L/R) are transmitted
together through the cable.
There are following three types of connecting jacks at the rear of the deck. Each type of jack requires a different type of
connecting cord.
LINE IN/OUT (analog input/output) jacks
Audio signal connecting cord (supplied, or
optional RK-C505KS etc.)
White LINE IN
=> © Left
"> © Right
LINE OUT white
Left e-
Right © #B
Red
Red
COAXIAL IN/OUT (digital input/output) jacks
OPTICAL IN/OUT (optical transmission digital
input/output) jacks
Coaxial digital connecting cord
COAXIAL (optional VMC-1ES etc.) COAXIAL
OUT IN
Optical cable
OPTICAL OUT (optional POC-15 etc.)
G— i] ll
How to connect the optical cable
OPTICAL IN
Remove the cap.
ies