Sony DTC-87ES Operating Instructions Manual page 34

Playback
Auto Play: Restarting Playback after Rewinding
While pressing <4, press >.
The tape is rewound to the beginning, and playback
starts automatically.
If the above operation is done immediately after the
cassette Is inserted, the auto play operation does not
function. Press » a few seconds after <4 is pressed.
The time search function is available only for the tape
portion where the absolute time code (page 18) is written.
1 Designate how much you want to advance the tape
forward or backward in minutes, using the numeric
buttons.
An amount in minutes can be set from 1 minute to 99
minutes.
Designating the amount in seconds is not possible.
! rm | c SAMPLING FREQ. PGMNO.
I, 7 a |
thin dos 4a kHz c a Lights
Time Searc o start playback by designating
the elapsed
CLEAR
The time search function is available only for the tape
portion where the absolute time code (page 18) is written.
This operation can be performed only with the Remote
Commander.
1 Press the TIME SEARCH button on the remote
commander.
The Hour, Minute and Second indicators appear on the
display.
2 Designate the time of the desired location from the
beginning of the tape.
When designating 1 hour and 15 minutes and 8 seconds.
2 Press »® to advance the tape forward, and
<4, backward.
The tape is fast-forwarded or rewound, stops at the
designated position, and playback resumes.
PGM NO.
ot _! Cc
L im jis TIME SEARCH
To send the tape To move the tape
backward forward
noes a
O
When << or & is pressed in pause mode, the tape stops
at the desired position in pause mode.
34
*
1 1 5 0 8
J ( 1 cH }
hh Gh
tl fet
fHf tmMLifis TIME SEARCH + Lights
3 Press >.
The tape is fasi-torwarded or rewound, stops at the
designated position, and playback resumes.
When & is pressed in pause mode, the tape stops
momentally at the desired position.
When designating just 3 minutes
Press the numeric buttons in the following order:
07-073
If you press the incorrect button when designating
Press the CLEAR button. The position to be designated
returns to the previous one.