Assembly Of Front Housing - Motorola i425e Detailed Service Manual

2.7.6 Assembly of Front Housing

1. Inspect the front housing for any scratches, nicks, spot and paint defect.
2. Remove the Pad of the lens and ensure it is clean and has no scratches.
3. Remove the liner of the Display and make sure is clean and has no scratches.
4. Assemble the front and back housing and verify that it is assembled properly.
5. Assemble the Spring and Battery latch on to the rear housing cover
6. Place the rear housing cover to rear housing.
1
3
6880401P26-O
PREPARING FOR FIELD LEVEL TESTING: Assembly of Front Housing
Tools Required:
Tweezers
4
2
5
6
61