PREPARING FOR FIELD LEVEL TESTING: Closing the Unit
2.7.7 Closing the Unit
1. Press the Front Cover to the unit until the snaps engage.
2. Place the unit into the screw nest fixture.
3. Place 6 screws on the unit in correct orderand torque to 1.4 -/+ 0.1 in-lbs..
4. Replace the SIM card as shown below.
5. Replace the Battery as shown below.
6. Replace the Battery Cover By inserting the two hook at the top end of the battery cover into the
corresponding slots on the back housing and snap closed..
1
2
Screw Nest Fixture: #130-1065 - Torque Settings: 1.4-/+0.1 in-lbs
4
62
3
5
5
1
6
2
6
3
4
6880401P26-O