Adjusting The Picture .Siscciccccccctscecestetectseoasasteesctsaeadsssceatnnaenceapeanucisvetstascavedeasesousteci; Pi Eeaeeaee; Cteate - Sony CVP-M1 Operating Instructions Manual

Adjusting the picture
"e
You can adjust the quality of prints.
You can also adjust the source (input) picture quality if
the picture quality differs between the printer and the
camcorder.
Adjusting ¢ the ame : bality"
of prints
Since you cannot determine the adjusted picture quality
on the TV screen, check the printed picture.
To adjust the brightness of prints
Set BRIGHT to the desired position.
¢ Set to "~" to decrease the brightness of the print.
* Set to "+" to increase the brightness of the print.
BRIGHT
— +
To adjust the sharpness of prints
Set SHARP to the desired position.
* Set to "—" to decrease the sharpness of the print.
* Set to "+" to increase the sharpness of the print.
Aeon the source
quality
You can also adjust the source (input) picture quality
before designating the 7icture. Normally, since you do
not have to adjust it, keep the controls at the center
position.
Tu adjust the hue of the source
picture
Adjust the hue of the picture by turning the HUE control.
¢ Turning to the left makes the hue redder.
¢ Turning to the right makes the hue greener.
RED _a—m GREEN
is
To adjust the color of the source
picture
Adjust the color of the picture by turning the COLOR
control.
¢ Turning to the left makes the color lighter.
¢ Turning to the right makes the color darker.
Other Print Options 1 9