Operation; Taking A Picture - Sony UPX-C21 Operating Instructions Manual

Operation

Taking a Picture

Standby lamp
1
Set the POWER switch to ON.
2
Set the PLAY/CAMERA switch to CAMERA.
The standby lamp lights in green.
3
Set the LCD MONITOR switch to ON.
After a few seconds, a picture appears on the LCD.
4
Press the flash mode button according to the lighting conditions ( is
recommended. The built-in strobe flashes synchronized with your
pressing the release button.)
5
Press the H/S button to select the resolution mode.
6
Point the camera at the subject, and adjust the frame by monitoring the
LCD of the camera.
Zooming is available by pressing the zoom lever.
7
Press the release button on the camera.
The standby lamp starts flashing in red. Once the picture is stored in
memory, flashing stops and the standby lamp lights in green.
When finished taking pictures
Set the POWER switch to OFF to save battery power.
4
7
5
1
P L A Y
C A M
E R A
6
W
T
2
L C D
M O N
IT O R
3
O N
O F F
M O D
E
S E T
37