Starting/Stopping Measurement; Resetting Data; Power Saving Function - Cateye EL135 Manual

Starting measurement

Starting/stopping measurement

Measurement starts automatically when the
bicycle moves.
During measurement the measurement unit
(km/h or mph) flashes.

Resetting data

Pressing and holding the MODE button when on the measurement
screen resets all measurement data to 0 (excluding Odo).
Power-saving function
If the computer does not receive
any signal for 10 minutes, the
power-saving screen is activated
and only the clock is displayed.
If MODE is pressed or a sensor
signal is received while the pow-
ersaving screen is activated, the
computer returns to the measure-
ment screen.
* If the computer is left on the
power-saving screen for 1 hour,
SLEEP is displayed. When the
computer is in this state, you can
return to the measurement screen
by pressing the MODE button.
[Measurement screen]
Measurement
starts
Measurement
screen
10 minutes
MODE
9
Measurement
stops
MODE
(Press and hold)
Power-saving
screen
1 hour
Sleep
1
2
3 3
4
SET