Starting/Stopping Measurement - Cateye Strada Smart CC-RD500B Online Manual

1. Close Cateye Cycling™ or from
turned off.
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor
signal is received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
Smartphone and smart computer
Switching to Sensor Direct Mode
Smartphone
Smart computer
(1 second)
Smartphone search
screen

Starting/stopping measurement

(MENU), check that [Connect] is
Measurement screen
(Sensor Direct Mode)
Important