How To Use: Pyrolytic Cleaning - AEG BFS8500T User Manual

CARE AND CLEANING
Step 2 Carefully pull the shelf supports
up and out of the front catch.
Step 3 Pull the front end of the shelf
support away from the side
wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.

11.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
Do not fill the water tank during cleaning. It restarts the cleaning cycle.
Step 1 Turn on the oven.
Step 2
Press:
Step 3 Put the baking tray on the first shelf position to collect water from the water tank.
- press to start water tank emptying.
Step 4 When the tank emptying ends remove the baking tray and removable shelf supports.
Wipe the oven cavity and the inner door glass with a soft cloth. Press:
Step 5 Select the cleaning mode.
Option
76/272
Before the Pyrolytic Cleaning:
Remove all accessories.
/ Cleaning.
Cleaning mode
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
.
Duration