Denon D-F10 Manual page 21

N
Q
Piay button Stop button
CD player (UCD-F10}
IN. C18B2:88.88. >»
marie sere bea ae eR OMeon
Pause button
The "DP" mark turns off and the "It" mark
appears on the display, and playback stops at the point
where the button was pressed.
Press the pause button (I).
Resuming playback
The "It" mark turns off and the "Db" mark
appears on the display, and playback resumes from
the point where the pause button was pressed.
Press the play button (>).
Stopping playback
'S 62.03.
UE ase ew ores eT sates
Press the stop button (MM).
us Playback Functions
In addition the regular playback, the 0-F10 also offers the following playback functions:
@Playing a specific track .................
(Using the remote control unit)
Example: Playing the 8th track
@® Press the DIRECT button.
@ Press the button corresponding to the number of the
track 8. "8" appears on the track number display and
playback of track number 8 begins.
® When the end of the track is reached, playback continues
on the next track.
© To specify a track nurnber of 11 or greater, say track 15,
press then [5], and to specify a track number of 20
or greater, say track 23, press then fa.
To play track 20, press then [70].
@ When the REPEAT button is pressed once,
appears on the display and the single-track repeat
mode is set.
@ Use the 144 and PPI buttons to select the track to be
repeated.
@ Press the play button (P) to start playback.
@ When the end of the specified track is reached, playback
Starts over from the beginning of that track.
The single-track repeat mode can also be set by Pressing
the REPEAT button once during playback.
© To cancel the single-track repeat mode, press the REPEAT
Dutton repeatedly until the "REPEAT" indicator turns off.
| Direct button
§44 (auto search button)
PPI (auto search button)
@ When the REPEAT button is pressed twice,
appears on the display and the all-track
repeat mode is set.
@ Press the play button (DP) to start playback.
@ The all-track repeat mode can also be set by pressing the
REPEAT button twice during playback.
© To cancel the ail-track repeat mode, press the REPEAT
button to turn the "REPEAT" indicator off,
elf the REPEAT button is pressed during programmed
playback, the tracks are played repeatedly in the program-
med order.
Play button (>)
REPEAT button
@ When a disc is loaded, "00" is displayed on the
track number display for several seconds while the
data on the number of tracks and total playing time is
being read from the innermost side of the disc, after
which the number of tracks and totat playing time
appear.
nm AA AM
uu YUUeb
21
(9)
m
2
m
a
>
re
"
m
i)
=
°
2