Alpine ELITE CALGARY Owner's Manual page 51

Table of Contents

Advertisement

UV SYSTEM BULB REPLACEMENT
It is a requirement of the owner to change the Ultra-Violet light bulb (if equipped)
every 18 months, however like any light-bulb, there is a chance the bulb could fail
before its expected lifetime is up. If this is the case, you will need to check the UV
LED Indicator. On some models, this can be found on the Alpine Logo on the outside
of the cabinetry OR inside the cabinetry, see 'Opening The Panels' on page 42 for
guidance on removing the cabinets. The LED Indicator will have changed from green
or blue to red if the bulb has failed. Check for this LED when performing your 3-4
monthly component inspection as per page 49.
UV Light Bulb Okay
Internal UV
LED Indicator
Cabinetry
Mounted UV
LED Indicator
Contact Alpine Spas to purchase a new UV light bulb - the bulb carries a 12 month
parts warranty. A replacement can be installed in a number of minutes without
needing to drain the spa pool. Please follow our video or photo guide found on our
support page (see link at the bottom of the page).
TECHNICAL SUPPORT CONTACT
If reading through this manual and following the solutions from the
troubleshooting guide has not resolved your issue, please contact Alpine Spas:
SELECT TECHNICAL SUPPORT FROM THE OPTIONS
Find support documents and guides on our website at:
www.alpinespas.co.nz/support or www.alpinespas.com.au/support
UV Light Bulb Failed
EMAIL
service@alpinespas.co.nz or
service@alpinespas.com.au
PHONE: 0800 99 33 88 (NZ) or
1800 99 33 88 (AUS)
Instructions
Open the cabinetry to inspect
the internal UV LED Indicator
Inspect your Alpine Logo
mounted on the outside of the
cabinetry
51
51

Advertisement

Table of Contents
loading

Table of Contents