Alpine ELITE CALGARY Owner's Manual page 15

Table of Contents

Advertisement

4
Inside the skimmer box, see the
circular holding piece that the
filter cartridge will sit over.
7
Connect only the top extension
tube to your Nature
Stick by
2
pressing it into the base.
10
Insert the basket grill into the top
of the filter, lining up the circular
hole.
Note: Only one Nature
For dual filter models, the Nature2 Stick can be fitted to either filter container. The
Nature2 Stick should be replaced (discarded) every 4 months.
NZ customers can purchase these from www.spasupplies.co.nz or at an Alpine
Spas showroom. AUS customers can purchase these from an Alpine Spas
showroom.
AVOID DAMAGE TO SPA POOL & VOIDING WARRANTY - ONLY USE FILTER
CARTRIDGES PURCHASED FROM ALPINE SPAS OR SPA SUPPLIES (SPA
SUPPLIES IS FOR NZ CUSTOMERS ONLY) .
5
Insert the filter and place it over
the circular holding piece so it sits
tight.
8
Place the Nature
2
centre of the filter cartridge,
extension tube first.
11
Press the basket down gently to
ensure a tight fit.
Stick is supplied (and required) for the NaturePure system.
2
Discard
6
Unpackage and layout your
Nature
Discard the smaller extension tube.
9
Stick into the
The Nature
the filter, not rising out above.
12
Replace the top lid by gently
putting downwards pressure while
turning clockwise, until it snaps
back into place.
Stick (supplied separately).
2
Stick should sit within
2
15
15

Advertisement

Table of Contents
loading

Table of Contents