Alpine ELITE CALGARY Owner's Manual page 21

The 'PUMP' button/s will activate the jet pump/s and high pressured water will flow
from the jet pieces. Turn the diverter valves to switch pressure between seats.
Setting the Time & Date
Be sure to set the correct date and time on the topside control panel. Vital
functions such as filtration, sanitisation cycles and power saving settings are
dependent on this being accurate. Navigate to the time & date display by following
the instructions below.
Press the button
Then press the TIME or DATE menu item to adjust, you may need to use the
or button to scroll up and down.
Once you have selected the TIME or DATE, press the
button to adjust accordingly. Time is set in 24-hour time format. Date is set by
weekday, day, month and year. Once you have finished each adjustment, press
the button to confirm.
Spa Pool Behavior - Running Modes
Your spa pool is pre-set to 'NORM' (normal) running mode by default which is the
standard operating mode and it's recommend to leave this unchanged as it is the
most economical mode for regular use. Normal mode means that the spa pool will
always aim to keep the water temperature at the users set temperature (default
38°C) so it is ready to use whenever you are. Other modes are available to use,
which may be useful at different times of the year or if you cannot use the spa pool
for a set period of time:
Name Mode
NORM Normal
AWAY Away
WEEK Week
Changing the Running Mode
Press the button
Press the MODE menu item to adjust, you may need to use the
button to scroll up and down. Cycle through Normal, Away or Week. Then press the
button to confirm.
Function
Normal operation for demand heating and filtration
Demand heating is DISABLED. Filtration is fixed at 1 hour per day (the
keypad will scroll "AWAY MODE" every 60 secs)
Monday to Thursday: Demand heating is DISABLED and filtration
fixed at 1 hour per day. Friday to Sunday: Normal Operation
, or
or
21
21