Alpine ELITE CALGARY Owner's Manual page 25

Sanitise/Clean-up Cycle
The sanitise button activates a 20 minute sanitisation cycle that runs the filtration
pump and ozone / U. V to filter the spa pool water to restore and refresh water
quality. At the start and end of the cycle, the
controller will sequentially (one at a time) run
a variety of pumps for one minute each to
purge the plumbing and clear any unfiltered
water trapped in those lines.
Key-lock Function
The keypad buttons can be locked to prevent accidental key presses or to limit
access to certain controller functions. This feature is particularly helpful when spa
pool covers are used or where children are present. There are two types of key-
locks available:
Full Lock Mode - locks all buttons so all presses are ineffective until unlocked.
Partial Lock Mode - only 'PUMPS', 'LIGHT' and 'SANITISE' buttons allowed.
Press the button
Press the LOCK menu item to adjust, you may need to use the
button to scroll up and down. Select between PARTIAL and LOCK. Then press the
button to confirm. (Default = OFF)
Partial Lock
To unlock a locked SmartTouch, press on a
locked button, the Enter Pin screen will appear
(refer aside). Press the unlock pin sequence
1,4,7,8,9 (L-shaped pattern) and then press the
ENTER button.
Full Lock
or
25
25