Toro Z Master Professional 5000 Series Operator's Manual page 41

5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
51).
6. Start the engine and drive to a flat area.
7. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note:
Change the engine-oil filter more frequently
when operating conditions are extremely dusty or
sandy.
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
Figure 51
Changing
40).
(Figure 52).
(Figure
g193530
Note:
engine, and then turn the oil filter an extra 3/4
turn.
3. Fill the crankcase with the proper type of new
oil; refer to
39).
41
Figure 52
Ensure the oil-filter gasket touches the
Checking the Engine-Oil Level (page
g008804
g027477